diff --git a/.gitignore b/.gitignore index ff3bd76..bdb66a7 100644 --- a/.gitignore +++ b/.gitignore @@ -1 +1,2 @@ motion +*.o \ No newline at end of file diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..ddafab2 --- /dev/null +++ b/Makefile @@ -0,0 +1,8 @@ +all: + gcc -Wall -O2 -o TSL2561.o -c TSL2561.c + gcc -Wall -O2 -o motion.o -c motion.c + gcc -Wall -O2 -o motion -l wiringPi -l curl TSL2561.o motion.o + make clean + +clean: + rm *.o > /dev/null 2>&1 & diff --git a/TSL2561.c b/TSL2561.c new file mode 100644 index 0000000..4fd90f9 --- /dev/null +++ b/TSL2561.c @@ -0,0 +1,458 @@ +/** + * Copyright 2014 Dino Ciuffetti + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "TSL2561.h" + +/** + * read two bytes from i2c bus getting a 16 bit unsigned integer + */ +static inline uint16_t tsl2561_read16(TSL2561 *sensor, uint8_t reg) { + uint16_t x; + + if(sensor->adapter_fd == -1) { // not opened + // TODO: choose a valid errno error + sensor->lasterr = -1; + return 0; + } + + // ask for reading + sensor->buf[0] = reg; + if(write(sensor->adapter_fd, sensor->buf, 1) != 1) { + sensor->lasterr = errno; + return -1; + } + + if(read(sensor->adapter_fd, sensor->buf, 2) != 2) { + sensor->lasterr = errno; + return 0; + } + + //printf("x1: 0x%0x, x2: 0x%0x\n", sensor->buf[1], sensor->buf[0]); + x = sensor->buf[1]; + x <<= 8; + x |= sensor->buf[0]; + + //printf("test: 0x%02x%02x: 0x%04x\n", sensor->buf[1], sensor->buf[0], x); + + return x; +} +/** + * read one byte from i2c bus getting a 8 bit unsigned integer + */ +static inline uint8_t tsl2561_read8(TSL2561 *sensor, uint8_t reg) { + uint8_t x; + + if(sensor->adapter_fd == -1) { // not opened + // TODO: choose a valid errno error + sensor->lasterr = -1; + return 0; + } + + // ask for reading + sensor->buf[0] = reg; + if(write(sensor->adapter_fd, sensor->buf, 1) != 1) { + sensor->lasterr = errno; + return -1; + } + + if(read(sensor->adapter_fd, sensor->buf, 1) != 1) { + sensor->lasterr = errno; + return 0; + } + x = sensor->buf[0]; + + return x; +} +/** + * write one byte to i2c bus getting + */ +static inline int tsl2561_write8(TSL2561 *sensor, uint8_t reg, uint32_t byte_value) { + if(sensor->adapter_fd == -1) { // not opened + // TODO: choose a valid errno error + sensor->lasterr = -1; + return -1; + } + + // we mask with (& 0xFF) to get the last 8 bits from a 32 bit unsigned integer + sensor->buf[0] = reg; + sensor->buf[1] = (byte_value & 0xFF ); + if(write(sensor->adapter_fd, sensor->buf, 2) != 2) { + sensor->lasterr = errno; + return -1; + } + return 0; +} +// TSL2561 Functions (inspired on Adafruit_TSL2561_U.cpp at https://github.com/adafruit/Adafruit_TSL2561) +// wake up TSL2561 by setting the control bit +static inline int TSL2561_ON(TSL2561 *sensor) { + int rc; + + if(sensor->adapter_fd == -1) { // not opened + // TODO: choose a valid errno error + sensor->lasterr = -1; + return -1; + } + + rc = tsl2561_write8(sensor, TSL2561_COMMAND_BIT | TSL2561_REGISTER_CONTROL, TSL2561_CONTROL_POWERON); + return rc; +} +// turn TSL2561 into power saving mode +static inline int TSL2561_OFF(TSL2561 *sensor) { + int rc; + + if(sensor->adapter_fd == -1) { // not opened + // TODO: choose a valid errno error + sensor->lasterr = -1; + return -1; + } + + rc = tsl2561_write8(sensor, TSL2561_COMMAND_BIT | TSL2561_REGISTER_CONTROL, TSL2561_CONTROL_POWEROFF); + return rc; +} +// this is a private function that is used to get data from the sensor (infrared + full spectrum including infrared) +static inline int tsl2561_getdata(TSL2561 *sensor, uint16_t *full_spectrum, uint16_t *infrared) { + TSL2561_ON(sensor); + // wait for the internal ADC to complete conversion + switch(sensor->integration_time) { + case TSL2561_INTEGRATIONTIME_13MS: + usleep(20000); + break; + case TSL2561_INTEGRATIONTIME_101MS: + usleep(150000); + break; + case TSL2561_INTEGRATIONTIME_402MS: + usleep(450000); + break; + } + //usleep(450000); + // reads two bytes from channel 0 (full spectrum + infrared) + //*full_spectrum = wiringPiI2CReadReg16(_fd, TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REGISTER_CHAN0_LOW); + *full_spectrum = tsl2561_read16(sensor, TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REGISTER_CHAN0_LOW); + //fprintf(stdout, "got 0x%04X for full spectrum light\n", *full_spectrum); + + // reads two bytes from channel 1 (infrared) + //*infrared = wiringPiI2CReadReg16(_fd, TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REGISTER_CHAN1_LOW); + *infrared = tsl2561_read16(sensor, TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REGISTER_CHAN1_LOW); + //fprintf(stdout, "got 0x%04X for ir light\n", *infrared); + + // turn the device off to save power + TSL2561_OFF(sensor); + + return 0; +} +/** + * converts the raw sensor values to the standard SI lux equivalent. + * returns 0 if the sensor is saturated and the values are unreliable. + */ +/**************************************************************************/ +static uint32_t TSL2561_CALCULATE_LUX(TSL2561 *sensor, uint16_t broadband, uint16_t ir) { + unsigned long chScale; + unsigned long channel1; + unsigned long channel0; + uint16_t clipThreshold; + unsigned long ratio1 = 0; + unsigned long ratio; + unsigned int b, m; + unsigned long temp; + uint32_t lux; + + // Make sure the sensor isn't saturated! + switch (sensor->integration_time) { + case TSL2561_INTEGRATIONTIME_13MS: + clipThreshold = TSL2561_CLIPPING_13MS; + break; + case TSL2561_INTEGRATIONTIME_101MS: + clipThreshold = TSL2561_CLIPPING_101MS; + break; + case TSL2561_INTEGRATIONTIME_402MS: + clipThreshold = TSL2561_CLIPPING_402MS; + break; + default: + clipThreshold = TSL2561_CLIPPING_402MS; + break; + } + + // return 0 lux if the sensor is saturated + if ((broadband > clipThreshold) || (ir > clipThreshold)) { + return 0; + } + + // get the correct scale depending on the intergration time + switch (sensor->integration_time) { + case TSL2561_INTEGRATIONTIME_13MS: + chScale = TSL2561_LUX_CHSCALE_TINT0; + break; + case TSL2561_INTEGRATIONTIME_101MS: + chScale = TSL2561_LUX_CHSCALE_TINT1; + break; + case TSL2561_INTEGRATIONTIME_402MS: + chScale = (1 << TSL2561_LUX_CHSCALE); + break; + default: /* No scaling ... integration time = 402ms */ + chScale = (1 << TSL2561_LUX_CHSCALE); + break; + } + + // scale for gain (1x or 16x) + if (!sensor->gain) chScale = chScale << 4; + + // scale the channel values + channel0 = (broadband * chScale) >> TSL2561_LUX_CHSCALE; + channel1 = (ir * chScale) >> TSL2561_LUX_CHSCALE; + + /* find the ratio of the channel values (Channel1/Channel0) */ + if (channel0 != 0) ratio1 = (channel1 << (TSL2561_LUX_RATIOSCALE+1)) / channel0; + + // round the ratio value + ratio = (ratio1 + 1) >> 1; + + #ifdef TSL2561_PACKAGE_CS + if ((ratio >= 0) && (ratio <= TSL2561_LUX_K1C)) + {b=TSL2561_LUX_B1C; m=TSL2561_LUX_M1C;} + else if (ratio <= TSL2561_LUX_K2C) + {b=TSL2561_LUX_B2C; m=TSL2561_LUX_M2C;} + else if (ratio <= TSL2561_LUX_K3C) + {b=TSL2561_LUX_B3C; m=TSL2561_LUX_M3C;} + else if (ratio <= TSL2561_LUX_K4C) + {b=TSL2561_LUX_B4C; m=TSL2561_LUX_M4C;} + else if (ratio <= TSL2561_LUX_K5C) + {b=TSL2561_LUX_B5C; m=TSL2561_LUX_M5C;} + else if (ratio <= TSL2561_LUX_K6C) + {b=TSL2561_LUX_B6C; m=TSL2561_LUX_M6C;} + else if (ratio <= TSL2561_LUX_K7C) + {b=TSL2561_LUX_B7C; m=TSL2561_LUX_M7C;} + else if (ratio > TSL2561_LUX_K8C) + {b=TSL2561_LUX_B8C; m=TSL2561_LUX_M8C;} + #else + if ((ratio >= 0) && (ratio <= TSL2561_LUX_K1T)) + {b=TSL2561_LUX_B1T; m=TSL2561_LUX_M1T;} + else if (ratio <= TSL2561_LUX_K2T) + {b=TSL2561_LUX_B2T; m=TSL2561_LUX_M2T;} + else if (ratio <= TSL2561_LUX_K3T) + {b=TSL2561_LUX_B3T; m=TSL2561_LUX_M3T;} + else if (ratio <= TSL2561_LUX_K4T) + {b=TSL2561_LUX_B4T; m=TSL2561_LUX_M4T;} + else if (ratio <= TSL2561_LUX_K5T) + {b=TSL2561_LUX_B5T; m=TSL2561_LUX_M5T;} + else if (ratio <= TSL2561_LUX_K6T) + {b=TSL2561_LUX_B6T; m=TSL2561_LUX_M6T;} + else if (ratio <= TSL2561_LUX_K7T) + {b=TSL2561_LUX_B7T; m=TSL2561_LUX_M7T;} + else if (ratio > TSL2561_LUX_K8T) + {b=TSL2561_LUX_B8T; m=TSL2561_LUX_M8T;} + #endif + + temp = ((channel0 * b) - (channel1 * m)); + + // do not allow negative lux value + if (temp < 0) temp = 0; + + // round lsb (2^(LUX_SCALE-1)) + temp += (1 << (TSL2561_LUX_LUXSCALE-1)); + + // strip off fractional portion + lux = temp >> TSL2561_LUX_LUXSCALE; + + // Signal I2C had no errors */ + return lux; +} + + +int TSL2561_SETINTEGRATIONTIME(TSL2561 *sensor, tsl2561IntegrationTime_t time) { + int rc; + + if(sensor->adapter_fd == -1) { // not opened + // TODO: choose a valid errno error + sensor->lasterr = -1; + return -1; + } + + TSL2561_ON(sensor); + rc = tsl2561_write8(sensor, TSL2561_COMMAND_BIT | TSL2561_REGISTER_TIMING, time | sensor->gain); + TSL2561_OFF(sensor); + if(rc == 0) { + sensor->integration_time = time; + //fprintf(stderr, "setting integration time: 0x%02x to 0x%02x\n", TSL2561_COMMAND_BIT | TSL2561_REGISTER_TIMING, time | sensor->gain); + return 0; + } else { + //fprintf(stderr, "Error setting integration time: 0x%02x to 0x%02x\n", TSL2561_COMMAND_BIT | TSL2561_REGISTER_TIMING, time | sensor->gain); + return -1; + } + return -1; +} +int TSL2561_SETGAIN(TSL2561 *sensor, tsl2561Gain_t gain) { + int rc; + + if(sensor->adapter_fd == -1) { // not opened + // TODO: choose a valid errno error + sensor->lasterr = -1; + return -1; + } + + TSL2561_ON(sensor); + rc = tsl2561_write8(sensor, TSL2561_COMMAND_BIT | TSL2561_REGISTER_TIMING, sensor->integration_time | gain); + TSL2561_OFF(sensor); + if(rc == 0) { + sensor->gain = gain; + //fprintf(stderr, "setting gain: 0x%02x to 0x%02x\n", TSL2561_COMMAND_BIT | TSL2561_REGISTER_TIMING, sensor->integration_time | gain); + return 0; + } else { + //fprintf(stderr, "Error setting gain: 0x%02x to 0x%02x\n", TSL2561_COMMAND_BIT | TSL2561_REGISTER_TIMING, sensor->integration_time | gain); + return -1; + } + return -1; +} +int TSL2561_OPEN(TSL2561 *sensor) { + char filename[20]; + + if(sensor->adapter_fd != -1) { // already opened + // TODO: choose a valid errno error + sensor->lasterr = -1; + return -1; + } + snprintf(filename, 20, "/dev/i2c-%d", sensor->adapter_nr); + if ((sensor->adapter_fd = open(filename, O_RDWR)) < 0) { // open the device file (requests i2c-dev kernel module loaded) + sensor->lasterr = errno; + return -1; + } + + if (ioctl(sensor->adapter_fd, I2C_SLAVE, sensor->sensor_addr) < 0) { // talk to the requested device + sensor->lasterr = errno; + close(sensor->adapter_fd); + sensor->adapter_fd = -1; + return -1; + } + + TSL2561_SETINTEGRATIONTIME(sensor, TSL2561_INTEGRATIONTIME_402MS); + TSL2561_SETGAIN(sensor, TSL2561_GAIN_16X); + + /* + TSL2561_ON(sensor); + tsl2561_write8(sensor, 0x81, 0x11); + TSL2561_OFF(sensor); + */ + + return 0; +} +void TSL2561_CLOSE(TSL2561 *sensor) { + if(sensor->adapter_fd != -1) { + close(sensor->adapter_fd); + sensor->adapter_fd = -1; + } +} + +/** + * sense the ambient light. Returns 0 on success, -1 on errors. + * the parameter pointer fullspectrum is the quantity og light at full spectrum (including infrared) + * the parameter pointer infrared is the quantity of infrared light + * if autogain is 0 a single sensor reading is done with the gain and integration time previously selected by invoking + * the TSL2561_SETINTEGRATIONTIME() and TSL2561_SETGAIN() functions. It autogain is 1 and automatic gain adjustment alghoritm is used + */ +int TSL2561_SENSELIGHT(TSL2561 *sensor, uint16_t *full_spectrum, uint16_t *infrared, uint32_t *lux, int autogain) { + int rc=1; + uint16_t fs, ir, hi, lo; + //tsl2561Gain_t old_gain; + + if(sensor->adapter_fd == -1) { + // TODO: choose a valid errno error + sensor->lasterr = -1; + return -1; + } + if (autogain == 0) { // autogain not requested. Executing a single sensor read + rc = tsl2561_getdata(sensor, full_spectrum, infrared); + *lux = TSL2561_CALCULATE_LUX(sensor, *full_spectrum, *infrared); + return rc; + } + + // autogain requested + switch(sensor->integration_time) { + case TSL2561_INTEGRATIONTIME_13MS: + hi = TSL2561_AGC_THI_13MS; + lo = TSL2561_AGC_TLO_13MS; + break; + case TSL2561_INTEGRATIONTIME_101MS: + hi = TSL2561_AGC_THI_101MS; + lo = TSL2561_AGC_TLO_101MS; + break; + case TSL2561_INTEGRATIONTIME_402MS: + hi = TSL2561_AGC_THI_402MS; + lo = TSL2561_AGC_TLO_402MS; + break; + default: + hi = TSL2561_AGC_THI_402MS; + lo = TSL2561_AGC_TLO_402MS; + break; + } + + // save the old gain + //old_gain = sensor->gain; + + // try to adjust the gain + rc = tsl2561_getdata(sensor, &fs, &ir); + if(rc != 0) { + return -1; // invalid read or sensor error + } + if ((fs < lo) && (sensor->gain == TSL2561_GAIN_1X)) { // light too low with this gain + // raise the gain and redo the reading + TSL2561_SETGAIN(sensor, TSL2561_GAIN_16X); + //printf("gain raised\n"); + rc = tsl2561_getdata(sensor, &fs, &ir); + // restore the previous gain + //TSL2561_SETGAIN(sensor, old_gain); + if(rc != 0) { // invalid read or sensor error + return -1; + } else { + // now consider the reading valid after being adjusted + *full_spectrum = fs; + *infrared = ir; + *lux = TSL2561_CALCULATE_LUX(sensor, *full_spectrum, *infrared); + return 0; + } + } + if ((fs > hi) && (sensor->gain == TSL2561_GAIN_16X)) { // light too high with this gain + // lower the gain and redo the reading + TSL2561_SETGAIN(sensor, TSL2561_GAIN_1X); + //printf("gain lowered\n"); + rc = tsl2561_getdata(sensor, &fs, &ir); + // restore the previous gain + //TSL2561_SETGAIN(sensor, old_gain); + if(rc != 0) { // invalid read or sensor error + return -1; + } else { + // now consider the reading valid after being adjusted + *full_spectrum = fs; + *infrared = ir; + *lux = TSL2561_CALCULATE_LUX(sensor, *full_spectrum, *infrared); + return 0; + } + } + + // the reading was valid without gain adjustment (or chip limits encountered!) + *full_spectrum = fs; + *infrared = ir; + *lux = TSL2561_CALCULATE_LUX(sensor, *full_spectrum, *infrared); + return 0; +} diff --git a/TSL2561.h b/TSL2561.h new file mode 100644 index 0000000..f2edc51 --- /dev/null +++ b/TSL2561.h @@ -0,0 +1,239 @@ +/************************************************************************** +* +* @file TSL2561.h +* @oldauthor K. Townsend (Adafruit Industries) +* @newauthor Dino Ciuffetti +* @date: 13/mar/2014 +* @modified Modified and redistributed according the license by Dino Ciuffetti +* @section OLDLICENSE +* +* Software License Agreement (BSD License) +* +* Copyright (c) 2013, Adafruit Industries +* All rights reserved. +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions are met: +* 1. Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* 2. Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the distribution. +* 3. Neither the name of the copyright holders nor the +* names of its contributors may be used to endorse or promote products +* derived from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY +* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY +* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +* @section NEWLICENSE -- This software is redistributed as apache v2 license according to the old license +* +* Copyright 2014 Dino Ciuffetti +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +* +**************************************************************************/ +#ifndef _TSL2561_H_ +#define _TSL2561_H_ + +#include +#include +#include + +#define TSL2561_VISIBLE 2 // channel 0 - channel 1 +#define TSL2561_INFRARED 1 // channel 1 +#define TSL2561_FULLSPECTRUM 0 // channel 0 + +// I2C address options +#define TSL2561_ADDR_LOW (0x29) +#define TSL2561_ADDR_FLOAT (0x39) // Default address (pin left floating) +#define TSL2561_ADDR_HIGH (0x49) + +// Lux calculations differ slightly for CS package +//#define TSL2561_PACKAGE_CS +#define TSL2561_PACKAGE_T_FN_CL + +#define TSL2561_COMMAND_BIT (0x80) // Must be 1 +#define TSL2561_CLEAR_BIT (0x40) // Clears any pending interrupt (write 1 to clear) +#define TSL2561_WORD_BIT (0x20) // 1 = read/write word (rather than byte) +#define TSL2561_BLOCK_BIT (0x10) // 1 = using block read/write + +#define TSL2561_CONTROL_POWERON (0x03) +#define TSL2561_CONTROL_POWEROFF (0x00) + +#define TSL2561_LUX_LUXSCALE (14) // Scale by 2^14 +#define TSL2561_LUX_RATIOSCALE (9) // Scale ratio by 2^9 +#define TSL2561_LUX_CHSCALE (10) // Scale channel values by 2^10 +#define TSL2561_LUX_CHSCALE_TINT0 (0x7517) // 322/11 * 2^TSL2561_LUX_CHSCALE +#define TSL2561_LUX_CHSCALE_TINT1 (0x0FE7) // 322/81 * 2^TSL2561_LUX_CHSCALE + +// T, FN and CL package values +#define TSL2561_LUX_K1T (0x0040) // 0.125 * 2^RATIO_SCALE +#define TSL2561_LUX_B1T (0x01f2) // 0.0304 * 2^LUX_SCALE +#define TSL2561_LUX_M1T (0x01be) // 0.0272 * 2^LUX_SCALE +#define TSL2561_LUX_K2T (0x0080) // 0.250 * 2^RATIO_SCALE +#define TSL2561_LUX_B2T (0x0214) // 0.0325 * 2^LUX_SCALE +#define TSL2561_LUX_M2T (0x02d1) // 0.0440 * 2^LUX_SCALE +#define TSL2561_LUX_K3T (0x00c0) // 0.375 * 2^RATIO_SCALE +#define TSL2561_LUX_B3T (0x023f) // 0.0351 * 2^LUX_SCALE +#define TSL2561_LUX_M3T (0x037b) // 0.0544 * 2^LUX_SCALE +#define TSL2561_LUX_K4T (0x0100) // 0.50 * 2^RATIO_SCALE +#define TSL2561_LUX_B4T (0x0270) // 0.0381 * 2^LUX_SCALE +#define TSL2561_LUX_M4T (0x03fe) // 0.0624 * 2^LUX_SCALE +#define TSL2561_LUX_K5T (0x0138) // 0.61 * 2^RATIO_SCALE +#define TSL2561_LUX_B5T (0x016f) // 0.0224 * 2^LUX_SCALE +#define TSL2561_LUX_M5T (0x01fc) // 0.0310 * 2^LUX_SCALE +#define TSL2561_LUX_K6T (0x019a) // 0.80 * 2^RATIO_SCALE +#define TSL2561_LUX_B6T (0x00d2) // 0.0128 * 2^LUX_SCALE +#define TSL2561_LUX_M6T (0x00fb) // 0.0153 * 2^LUX_SCALE +#define TSL2561_LUX_K7T (0x029a) // 1.3 * 2^RATIO_SCALE +#define TSL2561_LUX_B7T (0x0018) // 0.00146 * 2^LUX_SCALE +#define TSL2561_LUX_M7T (0x0012) // 0.00112 * 2^LUX_SCALE +#define TSL2561_LUX_K8T (0x029a) // 1.3 * 2^RATIO_SCALE +#define TSL2561_LUX_B8T (0x0000) // 0.000 * 2^LUX_SCALE +#define TSL2561_LUX_M8T (0x0000) // 0.000 * 2^LUX_SCALE + +// CS package values +#define TSL2561_LUX_K1C (0x0043) // 0.130 * 2^RATIO_SCALE +#define TSL2561_LUX_B1C (0x0204) // 0.0315 * 2^LUX_SCALE +#define TSL2561_LUX_M1C (0x01ad) // 0.0262 * 2^LUX_SCALE +#define TSL2561_LUX_K2C (0x0085) // 0.260 * 2^RATIO_SCALE +#define TSL2561_LUX_B2C (0x0228) // 0.0337 * 2^LUX_SCALE +#define TSL2561_LUX_M2C (0x02c1) // 0.0430 * 2^LUX_SCALE +#define TSL2561_LUX_K3C (0x00c8) // 0.390 * 2^RATIO_SCALE +#define TSL2561_LUX_B3C (0x0253) // 0.0363 * 2^LUX_SCALE +#define TSL2561_LUX_M3C (0x0363) // 0.0529 * 2^LUX_SCALE +#define TSL2561_LUX_K4C (0x010a) // 0.520 * 2^RATIO_SCALE +#define TSL2561_LUX_B4C (0x0282) // 0.0392 * 2^LUX_SCALE +#define TSL2561_LUX_M4C (0x03df) // 0.0605 * 2^LUX_SCALE +#define TSL2561_LUX_K5C (0x014d) // 0.65 * 2^RATIO_SCALE +#define TSL2561_LUX_B5C (0x0177) // 0.0229 * 2^LUX_SCALE +#define TSL2561_LUX_M5C (0x01dd) // 0.0291 * 2^LUX_SCALE +#define TSL2561_LUX_K6C (0x019a) // 0.80 * 2^RATIO_SCALE +#define TSL2561_LUX_B6C (0x0101) // 0.0157 * 2^LUX_SCALE +#define TSL2561_LUX_M6C (0x0127) // 0.0180 * 2^LUX_SCALE +#define TSL2561_LUX_K7C (0x029a) // 1.3 * 2^RATIO_SCALE +#define TSL2561_LUX_B7C (0x0037) // 0.00338 * 2^LUX_SCALE +#define TSL2561_LUX_M7C (0x002b) // 0.00260 * 2^LUX_SCALE +#define TSL2561_LUX_K8C (0x029a) // 1.3 * 2^RATIO_SCALE +#define TSL2561_LUX_B8C (0x0000) // 0.000 * 2^LUX_SCALE +#define TSL2561_LUX_M8C (0x0000) // 0.000 * 2^LUX_SCALE + +// Auto-gain thresholds +#define TSL2561_AGC_THI_13MS (4850) // Max value at Ti 13ms = 5047 +#define TSL2561_AGC_TLO_13MS (100) +#define TSL2561_AGC_THI_101MS (36000) // Max value at Ti 101ms = 37177 +#define TSL2561_AGC_TLO_101MS (200) +#define TSL2561_AGC_THI_402MS (63000) // Max value at Ti 402ms = 65535 +#define TSL2561_AGC_TLO_402MS (500) + +// Clipping thresholds +#define TSL2561_CLIPPING_13MS (4900) +#define TSL2561_CLIPPING_101MS (37000) +#define TSL2561_CLIPPING_402MS (65000) + +enum +{ + TSL2561_REGISTER_CONTROL = 0x00, + TSL2561_REGISTER_TIMING = 0x01, + TSL2561_REGISTER_THRESHHOLDL_LOW = 0x02, + TSL2561_REGISTER_THRESHHOLDL_HIGH = 0x03, + TSL2561_REGISTER_THRESHHOLDH_LOW = 0x04, + TSL2561_REGISTER_THRESHHOLDH_HIGH = 0x05, + TSL2561_REGISTER_INTERRUPT = 0x06, + TSL2561_REGISTER_CRC = 0x08, + TSL2561_REGISTER_ID = 0x0A, + TSL2561_REGISTER_CHAN0_LOW = 0x0C, + TSL2561_REGISTER_CHAN0_HIGH = 0x0D, + TSL2561_REGISTER_CHAN1_LOW = 0x0E, + TSL2561_REGISTER_CHAN1_HIGH = 0x0F +}; + +typedef enum +{ + TSL2561_INTEGRATIONTIME_13MS = 0x00, // 13.7ms + TSL2561_INTEGRATIONTIME_101MS = 0x01, // 101ms + TSL2561_INTEGRATIONTIME_402MS = 0x02 // 402ms +} tsl2561IntegrationTime_t; + +typedef enum +{ + TSL2561_GAIN_1X = 0x00, // No gain + TSL2561_GAIN_16X = 0x10, // 16x gain +} tsl2561Gain_t; + +typedef struct TSL2561 +{ + int adapter_nr; + tsl2561IntegrationTime_t integration_time; + tsl2561Gain_t gain; + int adapter_fd; + uint8_t sensor_addr; + int lasterr; + uint8_t buf[10]; +} TSL2561; + + +/* INITIALIZATION FUNCTIONS AND MACRO */ +/** + * Prepare the sensor. + * The first parameter is the raspberry pi i2c master controller attached to the TSL2561, the second is the i2c selection jumper. + * The i2c selection address can be one of: TSL2561_ADDR_LOW, TSL2561_ADDR_FLOAT or TSL2561_ADDR_HIGH + */ +#define TSL2561_INIT(i2cadapter, lightaddr) { \ + .adapter_nr = i2cadapter, \ + .integration_time = TSL2561_INTEGRATIONTIME_402MS, \ + .gain = TSL2561_GAIN_16X, \ + .adapter_fd = -1, \ + .sensor_addr = lightaddr, \ + .lasterr = 0, \ + .buf = {0} \ +}; +/** + * Initialize the sensor. Returns 0 on success, -1 on errors. + */ +int TSL2561_OPEN(TSL2561 *sensor); +/** + * Close the sensor. + */ +void TSL2561_CLOSE(TSL2561 *sensor); +/** + * Set the integration time. Returns 0 on success, -1 on errors. + * TSL2561_INTEGRATIONTIME_402MS or TSL2561_INTEGRATIONTIME_101MS or TSL2561_INTEGRATIONTIME_13MS + * TSL2561_INTEGRATIONTIME_402MS is slower but more precise, TSL2561_INTEGRATIONTIME_13MS is very fast but not so precise + */ +int TSL2561_SETINTEGRATIONTIME(TSL2561 *sensor, tsl2561IntegrationTime_t time); +/** + * Set the gain. Returns 0 on success, -1 on errors. + * It can be TSL2561_GAIN_1X or TSL2561_GAIN_16X + * Use 16X gain to get more precision in dark ambients, or enable auto gain with TSL2561_SENSELIGHT() + */ +int TSL2561_SETGAIN(TSL2561 *sensor, tsl2561Gain_t gain); +/** + * Sense the ambient light. Returns 0 on success, -1 on errors. + * the parameter pointer fullspectrum is the quantity og light at full spectrum (including infrared) + * the parameter pointer infrared is the quantity of infrared light + * if autogain is 0 a single sensor reading is done with the gain and integration time previously selected by invoking + * the TSL2561_SETINTEGRATIONTIME() and TSL2561_SETGAIN() functions. It autogain is 1 and automatic gain adjustment alghoritm is used + */ +int TSL2561_SENSELIGHT(TSL2561 *sensor, uint16_t *full_spectrum, uint16_t *infrared, uint32_t *lux, int autogain); + +#endif \ No newline at end of file diff --git a/motion.c b/motion.c index d6b25a1..212de9a 100644 --- a/motion.c +++ b/motion.c @@ -1,9 +1,11 @@ #include -#include #include #include +#include +#include #include +#include "TSL2561.h" #define MOTION_PIN 0 #define SECONDS_TO_OFF 5*60 @@ -59,29 +61,56 @@ void light_control_script(int turn_on) { curl_global_cleanup(); } +void setup_light_sensor(TSL2561* tsl) { + int rc = TSL2561_OPEN(tsl); + if(rc != 0) { + fprintf(stderr, "Error initializing TSL2561 sensor (%d). Check your i2c bus (es. i2cdetect)\n", tsl->lasterr); + // you don't need to TSL2561_CLOSE() if TSL2561_OPEN() failed, but it's safe doing it. + TSL2561_CLOSE(tsl); + return; + } + TSL2561_SETGAIN(tsl, TSL2561_GAIN_1X); + TSL2561_SETINTEGRATIONTIME(tsl, TSL2561_INTEGRATIONTIME_101MS); +} + +uint32_t read_light_level(TSL2561* tsl) { + uint32_t lux=0; + uint16_t broadband, ir; + TSL2561_SENSELIGHT(tsl, &broadband, &ir, &lux, 0); + return lux; +} + int main(){ wiringPiSetup(); pinMode(MOTION_PIN, INPUT); + + TSL2561 light_sensor = TSL2561_INIT(1, TSL2561_ADDR_FLOAT); + setup_light_sensor(&light_sensor); + while(1){ pin_read = digitalRead(MOTION_PIN); while(state && !pin_read){ - counter += 1; - if(counter >= SECONDS_TO_OFF*2){ - printf("Turning off\n"); - //system("tvservice -o"); - system("vcgencmd display_power 0"); - light_control_script(0); - state = 0; - } - usleep(500*1000); - pin_read = digitalRead(MOTION_PIN); + counter += 1; + if(counter >= SECONDS_TO_OFF*2){ + printf("Turning off\n"); + //system("tvservice -o"); + system("vcgencmd display_power 0"); + light_control_script(0); + state = 0; + } + usleep(500*1000); + pin_read = digitalRead(MOTION_PIN); } if(!state && pin_read){ printf("Turning on\n"); - light_control_script(1); system("vcgencmd display_power 1"); + + if(read_light_level(&light_sensor) < 10) { + light_control_script(1); + } + //system("tvservice -p"); //system("fbset -depth 8"); //usleep(50*1000); @@ -95,5 +124,7 @@ int main(){ counter = 0; usleep(500*1000); } + + return 0; }